square wave pulse meaning in Chinese

矩形脉冲

The electrochemical performance of high silicon - iron anodes exerted by square wave pulsed currents ( swpcs ) was studied by electrochemical
摘要采用电化学方法和阳极消耗率评价法研究了高硅铸铁阳极在方波脉冲电流作用下的电化学性能。
The specific route is as follows : firstly , the output signals from the multipath sensor are nornalized , i . e . , all sensor signals ( including the analog data ) are transformed into multipath square wave pulse signals to form multipath parallel condition codes . these codes are treated as input signals for dac to obtain a series of dispersed analog signals for output as input signals for the vco . finally , a high frequency modulation signal is conducted at the vco ' s output
具体技术路线如下：先将由多路传感器输出的信号进行归一化处理，即将所有传感器信号(包括模拟量)转换成多路方波脉冲信号，以形成多位并行信号的状态码，将其作为dac的数据输入信号，从而得到一系列离散的模拟信号输出，作为vco的输入信号，最终在vco输出端形成高频的调制信号。